FR1-SOLARO
Deliver premium collaboration experiences without the cost. Solaro FR1 is a 1U 16-card-slot DSP with modular I/O functionality that can evolve to meet your future requirements, while benefiting from the processing power to drive multiple rooms over an installed CatX network. Xilica’s open-architecture digital signal processor can be populated with any combination of Solaro Series I/O card, offering capabilities including analog audio, USB (with volume/mute HID support), GPIO, relay control and AES/EBU digital audio. With the capability to grow as you need, Solaro FR1 is a multi-purpose, scalable signal processor suited to most medium-to-large applications including multi-room conferencing, education spaces, and mass communication.
Solaro FR1 is not compatible with legacy Touch SM7 or Mini Series controls, nor is it recommended to develop a networked system with both FR1 and Neutrino products.
BENEFITS
Deliver a premium collaboration experience at lower cost through centralized processing of multiple rooms using an existing installed CatX network.
Support BYOD in collaboration spaces with Gio USB and Gio Bluetooth connectivity, and create a superior user-experience with Microsoft Teams mute/volume sync for USB peripherals.
Eliminate third-party control systems with no-code programming and leverage pre-built DSP designs for turn-key deployment.
Lower total-cost-of-ownership with agile, modular I/O that scales to meet functional demand.
Harness Xilica HearClear™ acoustic echo cancellation to eliminate noise and echo in conferencing.
TECHNICAL SPECIFICATIONS
Electrical
THD+N (22Hz to 22kHz) 0.002% (1kHz @ +4dBu)
EIN <125dBu, unweighted (20Hz to 20kHz)
Dynamic Range 110dB, unweighted
Propagation Delay 4ms
Crosstalk, input to input, 1kHz <110dB
Sampling Rate 48kHz
A/D-D/A Converters 32-bit
Acoustic Echo Cancellation Requires HearClear™ license; 250ms latency at eight channels, 100ms at 16 channels
BTU/Heat Load 205 BTU/hr
Processor Type 40-bit floating point
Phantom Power +48VDC (with XC-SML)
Power Supply 90-240 VAC (50-60Hz) via internal power supply with IEC socket
Power Consumption <60W
Ambient Operating Temperature 32-104°F (0–40°C)
Humidity 0–98%, non-condensing
Altitude 0-6,600 feet (0–2000 Meters) MSL
Network Connections
Without XC-CTODN: 1x RJ45 (≥Cat 5e) for control.
With XC-CTODN: 3x RJ45 (≥Cat 5e) including dual dedicated 1000Mbps
Dante™ connections and separate Ethernet port for control
USB (with XC-SUB)
Bit depth: 16-bit
Number of channels: 2x2, send and receive
Driver sample rate: 48kHz
Card sample rate: follows DSP settings
Connector: USB B, female
Dante™ Requires XC-CTODN; 64x64 bi-directional (primary, secondary) with dual NIC; AES67
Mechanical
Card Slots 16 user-configurable
Display(s) Single OLED display at front of device
Controls, Service & Indicators Up/Select/Down buttons. Recessed IP reset. Factory service micro-USB.
Weight 11lbs; 5kg
Dimensions
Height: 1.75" / 44mm
Width: 19" / 483mm
Depth: 12" / 305mm
Mounting Standard 19" rack; occupies 1U
General
Compliance CE, FCC Part 15B, Industry Canada ICES-003:7, Intertek ETL (US, CA), RoHS, REACH
Warranty Xilica Five Year Limited Warranty
Part Number(s) 2200-001-0104 (FR1, without XC-CTODN); 2200-001-0105 (FR1-D, with XC-CTODN)
