4K HDR HDMI INPUT FOR H2XC TXH2XADZ WYRESTORM

AUDIO ZONE EXPANSION CARD FEATURING HDMI INPUT, HDMI OUTPUT, AUDIO INPUT AND DSP OUTPUT

TX-H2X-ADZ

Offering both an HDMI input & output, the ADZ card provides an 18Gbps link direct to the matrix backplane. Supporting both 2160p 4:4:4 8-bit & HDR content and multi-channel audio formats up to Dolby Atmos™, it offers the ability to use native HDMI connectivity without the need for a transmission port (reducing cost) and maintains an audio DSP output. It is the perfect partner for WyreStorm’s range of hybrid optical fiber HDMI cables.

18 GBPS BACKPLANE
The highest possible bandwidth that currently exists according to the HDMI 2.0 specification can be managed by the TX-H2X-ADZ and sent over distance. Newly emerging 60Hz HDR-10 & Dolby Vision content can also be handled by this powerful future-ready device.

AUDIO DSP
No two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, volume and variable delay, which can be set per zone for a truly customized room-by-room balance.

GREAT VALUE OPTION
Omitting the complex HDBaseT transmission port, this card allows an input, output and audio functionality to still be added to an H2XC matrix. Whether adding just another audio zone or tapping into the 18Gbps backplane for further I/O, this card can still do it all.

HDCP2.2
The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the growing H2 product family, all H2XC matrix cards and peripheral devices support the multi-point distribution of this content over HDMI, HDBaseT and multi-mode fibre.

• 18Gbps HDMI input to matrix backplane
• Switched HDMI output capable of 2160p 4:4:4 and HDR @ 60Hz
• Audio zone output: analog stereo pre-out with mirrored S/PDIF output
• Separate S/PDIF input for additional audio source
• Adds additional audio zone + DSP to an H2XC chassis
• Supports 4K/60 4:4:4 or RGB content
• Compatible with all HDR standards such as HDR-10, HLG and Dolby Vision™
• Passes all audio formats including DTS:X and Dolby Atmos
• Cost-effective pure HDMI card aligns perfectly with WyreStorm Active Optical HDMI cables

SPECIFICATIONS

Audio and Video

• Inputs:
  • 1x HDMI In: 19-pin type A
  • 1x S/PDIF In: S/PDIF Coaxial Digital
• Outputs:
  • 1x HDMI Out: 19-pin type A
  • 1x Audio Out: 3-pin Terminal Block – 3.5mm
  • 1x S/PDIF Out: S/PDIF Coaxial Digital
• Output Video Encoding: NA
• Encoding Data Rate: NA
• End to End Latency: NA
• Audio Formats:
  • S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
  • HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

• Video Resolutions (Max)	Video Resolutions	HDMI
  	1920x1080p @60Hz 12bit	15m/49ft
  	3840x2160p @24Hz 10bit 4:2:0 HDR	7m/23ft
  	3840x2160p @30Hz 8bit 4:4:4	7m/23ft
  	3840x2160p @60Hz 10bit 4:2:0 HDR	5m/16ft
  	3840x2160p @60Hz 12bit 4:2:0 HDR	3m/10ft
  	4096x2160p @60Hz 8bit 4:2:0	7m/23ft
  	4096x2160p @60Hz 8bit 4:4:4	3m/10ft

• Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.
• Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
• Maximum Pixel Clock: HDMI: 600MHz

Communication and Control

• HDMI: HDCP 2.2 | EDID | DVI-D supported with adapter (not included)
• CEC: CEC power triggering | Requires CEC compatibility

Power

• Power Supply: Internal to Matrix
• Max Power Consumption: Matrix Dependent

Environmental

• Operating Temperature: Matrix Dependent
• StorageTemperature: Matrix Dependent
• Maximum BTU: Matrix Dependent