TUR-TPA12200

$2,899.00 MSRP inc.GST

TPA122/00

Array able 2 Way 12″ Full Range Loudspeaker for Installation Applications, 100° H x 100° V Dispersion

 

Product Features

  • Array able 2 way full range loudspeaker for installation applications
  • Wide 100? H x 100? V dispersion waveguide
  • 500 Watts continuous, 2,000 Watts peak power
  • Carbon fiber loaded 12″ low frequency driver with inside/outside wound coil
  • Aluminum dome 1″ neodymium motor compression driver
  • Multiple array configurations for extended coverage
  • Switchable passive/bi-amp operation for flexibility of use
  • Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
  • Multiple internal rigging points allow bracket mount and suspension in any orientation
  • 15 mm (5/8″) birch plywood enclosure with hard wearing semi matt black paint finish
  • Architecturally styled powder coated perforated steel mesh grille
  • Neutrik speakON* NL4 and barrier strip connectors
  • 10-Year Warranty Program*
  • Designed and engineered in the U.K
PRAGUE TPA122/00

The 2 way full range TPA122/00 is a switchable passive/bi-amp 12″ 2,000 Watt array able loudspeaker system that is ideally suited for a wide range of speech and music sound reinforcement applications. The TPA122/00 is designed to work in conjunction with TURBOSOUND loudspeaker management systems, providing optimal FOH performance, as well as offering considerable flexibility to readily adapt to varying venue requirements.

The TPA122/00 array able loudspeaker features a carbon fiber loaded 12″ low frequency driver with inside/outside wound coil with low mass voice coil for improved transient response, and an aluminum dome 1″ neodymium motor compression driver mounted on a 100° horizontal by 100° vertical waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch.

Finished in a highly durable semi matt black paint, the cabinet is constructed from 15 mm (5⁄*”) birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Internal M10 threaded rigging points are provided for suspension in any orientation, or mounting with dedicated brackets – available separately. The rear panel connector plate carries Neutrik speakON* NL4 and barrier strip connectors for input and link connections to additional enclosures.

Architecture & Engineering Specifications

The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 12″ (316 mm) LF driver and one 1″ (25 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 45 Hz to 18 kHz and within -10 dB from 40 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 100° H x 100° V. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 40 Watts continuous, 160 Watts peak, LF: 500 Watts continuous, 2,000 Watts peak; passive: 500 Watts continuous, 2,000 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 97 dB, 1 Watt @ 1 meter. Maximum SPL (peak) measured at 1 meter with music program at stated amplifier input shall be HF: 128 dB, LF: 130 dB; passive: 130 dB. Dimensions: 711 mm high x 368 mm wide x 458 mm deep (28.0″ x 14.5″ x 18.0″). Net weight: 23.2 kg (51.1 lbs). The loudspeaker system shall be the TURBOSOUND TPA122/00. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.