Speakers

TUR-TFM152M

Turbosound – TFM152M

$2,199.00 RRP Inc GST

Quantity

Turbosound TFM152M 350W 15 inch 2-way Flashline Series Passive Stage Monitor

 

Description 

 

Passive Coaxial Stage Monitor for Serious Touring Rigs

If you want the amazing flexibility and precise sound of a Turbosound Flashline stage monitor that you can integrate with the amp system you already have, then you’re looking at the right tool for the job. This TFM152M includes Turbosound’s amazing coaxial speaker system, which focuses highs and lows so that they come from the same point, dramatically improving sound consistency across the stage while decreasing the size of the cabinet. And with two power-handling modes, this TFM152M is ready to integrate easily into your monitoring system.

Pro-quality coaxial speakers deliver consistent sound

Unlike typical monitor wedges, which use either a single driver or a traditional low- and high-frequency driver layout, the TFM152M includes a custom Turbosound coaxial driver. This speaker includes a 15″ main driver with a carbon fiber cone and neodymium magnet, at the center of which is a 1.4″ titanium dome compression driver. Sweetwater sound-reinforcement techs and performers love this kind of speaker, since all the audio comes from a single point. This ensures that you’ll hear the same thing, no matter where you are onstage.

  • Coaxial speakers deliver centralized sound for consistent monitoring
  • 15″ neodymium-coil driver with carbon fiber cone delivers powerful lows
  • Titanium-dome 1.4″ compression driver reproduces smooth highs

 

Two power modes provide maximum setup flexibility

Every live sound monitoring system is a little bit different, and to ensure total setup flexibility, Turbosound outfitted their TFM152M with a 2-mode input. A simple switch lets you select from Passive mode and Bi-Amp mode. Passive mode is a more traditional full-range setup, which runs the entire input through the TFM152M’s internal crossover for automatic frequency distribution. Alternatively, you can set the TFM152M to Bi-Amp mode, which divides the speakON input into two channels, allowing you to send separate feeds to the high- and low-frequency drivers, controlling the balance from your mixer instead.

  • 2 power-handling modes offer extreme monitoring setup flexibility
  • Passive mode runs full-range audio through the onboard crossover
  • Bi-Amp mode accepts separate high- and low-frequency signals

 

Features 

 

  • Touring-ready 2-way/2-mode passive stage wedge
  • Dual modes include Passive (full range) and Bi-Amp (split LF/HP)
  • 350W RMS/1400W peak (8 ohms) power handling in Passive mode
  • 310W RMS/1240W peak (8 ohms) power handling LF driver in Bi-Amp mode
  • 40W RMS/400W peak (8 ohms) power handling HF driver in Bi-Amp mode
  • Coaxial 15″ LF/1.4″ HF drivers provide centralized sound for consistent projection
  • Low-profile design looks good and provides 60-degree/40-degree dispersion
  • Fiberglass-reinforced 5/8″ plywood provides added protection and stability

 

Specifications 

 

Frequency Response 65 Hz – 18 kHz ± 3 dB
50 Hz – 20 kHz -10 dB
Nominal Dispersion 60° H x 40° V @ -6 dB points, rotatable
Directivity Factor (Q) 18.3
Directivity Index (DI) 12.6
Power Handling (IEC)
Sensitivity 96 dB (1 W @ 1 m)
Maximum SPL
Impedance
Crossover Type Passive / bi-amp, switchable
Components 1 x 15″ (393.5 mm) LF driver
1 x 1.4″ (33 mm) HF compression driver
Enclosure
Connectors 2 x Neutrik speakON NL4,
Wiring
Dimensions (H x W x D) 351 x 530 x 565 mm (13.8 x 20.9 x 22.3″)
Net Weight 19.4 kg (42.7 lbs)
Construction 15 mm (5/8″) birch plywood + Polypropylene plastic
Finish Semi matt black paint
Grille Powder coated perforated steel
Flying Hardware N/A
SKU TUR-TFM152M Categories , , , ,

Related Products