TCX152-R
2-Way 15\ Loudspeaker for Installation Applications (Weather Resistant)
Description
DUBLIN TCX152-R
The DUBLIN TCX152-R is a 1,400 Watt compact 15″ passive two way loudspeaker that is ideally suited for a wide range of portable or installed speech and music sound reinforcement applications. TCX152-R consists of a trapezoidal enclosure housing a high excursion 15″ reflex-loaded low frequency driver with low mass voice coil for improved transient response, and a 1″ high temperature dome compression driver mounted on a rotatable converging elliptical waveguide, which provides a 90° horizontal by 60° vertical dispersion pattern.
Custom-Engineered Drivers
Turbosound is recognized the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilizing only drivers designed specifically for each application � it’s what sets us apart from the competition. TCX152-R’s high excursion 15″ low frequency and 1″ high temperature dome compression drivers ensure truly world-class performance that will stand the test of time.
Rotatable Waveguide
The TCX152-R’s compression driver is mated to a converging elliptical waveguide that is rotatable through 90°, allowing a swap of the horizontal and vertical dispersion patterns for a smooth wave front, while providing exceptional pattern control. This feature is especially useful for retaining wide horizontal dispersion when the enclosure is mounted horizontally due to ceiling height restrictions.
Construction and Connectivity
Constructed from 15 mm (5⁄8″) birch plywood, the cabinet is finished in hard wearing semi matt black textured paint and includes internal M10, M8 and M6 threaded rigging points for use with Turbosound wall and ceiling brackets, and industry standard loudspeaker brackets. A perforated steel mesh grille backed with reticulated foam protects the drive units. The rear panel features a sealed captive cable and gland.
Designed to Weather the Elements
When permanently installed, the TCX152-R presents a discreet appearance with no visible side handles for visually unobtrusive loudspeaker arrays. The weatherized paint, zinc plated grill with outdoor powder coat, and weather resistant coated drivers deliver an iP54 rated package that not only provides class-leading performance, but maintains its attractive appearance for many years.
Architecture & Engineering Specifications
The loudspeaker shall be of the full range, two-way passive type consisting of one 15″ (381 mm) LF driver and one 1″ (25 mm) HF compression driver. The loudspeaker shall be weather resistant for outdoor use, to rating standard IP54. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 85 Hz to 18 kHz and within -10 dB from 55 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 90° H x 60° V, rotatable. Nominal impedance shall be 8 Ohms. Power handling shall be 350 Watts continuous, 1,400 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth,
shall be 99dB, 1 Watt @ 1 meter. Maximum SPL (peak), measured at 1 meter with music program at stated amplifier input, shall be 131dB. Dimensions: 652mm high x 466 mm wide x 422 mm deep (25.7″ x 18.3″ x 16.6″). Net weight: 23.5 kg (51.8 lbs). The loudspeaker system shall be the Turbosound TCX152-R. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.
Features
- 2 way loudspeaker for installation applications
- 350 Watts continuous, 1,400 Watts peak power
- All components weather resistant to IP54 for outdoor use
- High excursion 15″ low frequency driver with low mass voice coil for improved transient response
- 1″ high temperature dome compression driver with extended high frequency reproduction
- Rotatable converging elliptical waveguide provides 90? H x 60? V dispersion
- M10, M8 and M6 rigging points compatible with Turbosound and Omni Mount * brackets
- Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
- 15 mm (5/8″) birch plywood enclosure with hard wearing semi matt black paint finish
- Powder coated perforated plated steel mesh grille with foam backing
- Captive cable tail with sealed cable gland on aluminum connector panel
- Designed and engineered in the U.K.
Specifications
| Frequency response |
85 Hz – 18 kHz ±3 dB
55 Hz – 20 kHz -10 dB |
| Nominal dispersion |
90° H x 60° V @ -6 dB points |
| Power handling (IEC) |
350 W continuous, 1,400 W peak |
| Sensitivity |
99 dB (1 W @ 1 m) |
| Maximum SPL |
125 dB continuous, 131 dB peak |
| Impedance |
8 O |
| Components |
1 x 15″ (381 mm) LF driver
1 x 1″ (25 mm) HF compression driver |
Enclosure
| Connectors |
2-core captive cable tail |
| Wiring |
1+ / 1- input, pins 2+ / 2- link |
| Dimensions (H x W x D) |
652 x 466 x 422 mm (25.7 x 18.3 x 16.6″) |
| Net weight |
23.5 kg (51.8 lbs) |
| Construction |
115 mm (5/8″) birch plywood |
| Finish |
Semi matt black paint |
| Grille |
Powder coated perforated Zinc plated steel |
| Flying hardware |
M10 x 9, M8 x 4, M6 x 4 Points |
