My Account

(07) 3397 8155

Facebook-f Instagram
Twitter
Speakers

TUR-NUQ122

Turbosound – NUQ122

$1,399.00 RRP Inc GST

Quantity

NuQ122

2 Way 12″ Full Range Loudspeaker for Portable PA and Installation Applications

 

Description 

 

NuQ122

The 2 way full range NuQ122 is a switchable passive/bi-amp 1,600 Watt 12″ loudspeaker system ideally suited for a wide range of speech and music sound reinforcement applications. Engineered to work in conjunction with TURBOSOUND loudspeaker management systems, the NuQ122 provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. The symmetrical trapezoidal shape and high frequency dispersion pattern also make the NuQ122 an obvious choice for mirrored left/right monitor wedge placement.
The NuQ122 loudspeaker features a 12″ low frequency driver with a low mass voice coil for improved transient response, and an aluminum dome 1″ neodymium high frequency compression driver mounted on a 70° horizontal by 70° vertical dispersion low distortion waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch. The rear panel connector plate carries Neutrik speakON * NL4 connectors for input and link connections to additional enclosures.
Finished in a highly durable semi matt black paint, the cabinet is constructed from 15 mm (⅝”) birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Multiple threaded rigging points are provided for suspension in any orientation, or for mounting with industry standard wall brackets. An optional flying yoke allows for further flexibility in install applications (available separately). The NuQ122 also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport.

 

Architecture & Engineering Specifications

The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 12″ (316 mm) LF driver and one 1″ (25 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 55 Hz to 18 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 70° H x 70° V. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 40 Watts continuous, 160 Watts peak, LF: 400 Watts continuous, 1,600 Watts peak; passive: 400 Watts continuous, 1,600 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 96 dB, 1 Watt @ 1 meter. Maximum SPL (peak), measured at 1 meter with music program at stated amplifier input, shall be HF: 128 dB, LF: 128 dB; passive: 128 dB. Dimensions: 655 mm high x 374 mm wide x 340 mm deep (25.8″ x 14.7″ x 13.4″). Net weight: 19.6 kg (43.1 lbs). The loudspeaker system shall be the TURBOSOUND NuQ122. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.

 

Features 

 

  • 2 way full range loudspeaker for portable PA and installation applications
  • 400 Watts continuous, 1,600 Watts peak power
  • Ideal for FOH, side fill and monitor applications
  • 12″ low frequency driver with low mass voice coil for improved transient response
  • Aluminum dome 1″ neodymium motor compression driver
  • Low distortion waveguide provides 70° H x 70° V dispersion
  • 15 mm (5/8″) birch plywood enclosure with hard wearing semi matt black paint finish
  • Rugged powder coated perforated steel mesh grille
  • Integral 35 mm pole mount and handles
  • Multiple internal rigging points allow bracket mount and suspension in any orientation
  • Neutrik speakON * NL4 connectors for reliable long life operation

 

Specifications 

 

Frequency Response 55 Hz – 18 kHz ±3 dB
50 Hz – 20 kHz -10 dB
Nominal Dispersion 70° H x 70° V @ -6 dB points
Directivity Factor (Q) 9.4
Directivity Index (DI) 9.7
Power Handling (IEC)
Sensitivity 96 dB (1 W @ 1 m)
Maximum SPL
Impedance
Crossover Type Passive / bi-amp switchable
Components 1 x 12″ (316 mm) LF driver
1 x 1″ (25 mm) HF compression driver
Enclosure
Connectors 2 x Neutrik speakON NL4
Wiring
Dimensions (H x W x D) 655 x 374 x 340 mm (25/8 x 14.7 x 13.4″)
Net Weight 19.6 kg (43.1 lbs)
Construction 15 mm (5/8″) birch plywood
Finish Semi matt black paint
Grille Powder coated perforated steel
Flying Hardware M10 x 12 points
SKU TUR-NUQ122 Categories , , , ,

Related Products

Related products

Contact Us

Have any questions? We’d love to hear from you.




    (07) 3397 8155

    sales@delsound.com.au

    Monday – Friday
    8:00am – 4:00pm

    58 Holdsworth Street,
    Coorparoo, Qld 4151

    View Cart Checkout Continue Shopping