TOA-DX0808

MSRP inc.GST

TOA – DX0808 – Matrix Mixer Analogue – 8 In / 8 Out – 8 Signal Buses

  • Digitally controlled 8 x 8 analog matrix unit for routing, distribution, level control and mixing of signal.
  • 8 input channels, 8 output channels and 8 signal buses.
  • 64 switching matrix points with level control from 8 signal buses to 8 signal outputs.
  • Cross fade possible when changing matrix pattern.
  • Number of input and output channels expandable with multiple unit configurations for 32 inputs and outputs. (Each DX-0808 requires two YA-8 connection cables for expansion).
  • Signal routing and level setting can easily be made with PC control software and stored into 16 onboard memories.
  • Preset routing and signal level can be easily recalled for operation by using memory switch or memory control input / output while the unit is diconnected from the PC.
  • Up to 30 units (including the DP / DX / DI units) can be connected to the same network (RS-485) and controlled by a single PC.
  • Both RS-232C and RS-485 communication ports are provided.
  • System lock and password protection.
Specification
Performance
Frequency Response 20Hz ~ 20kHz, (+0.5dB, -2.0dB).
Total Harmonic Distortion Less than 0.5% at 1kHz, +4dB.
Hum and Noise Less than -86dB, 20Hz ~ 20kHz, fully assigned.
Crosstalk Less tahn -70dB at 1kHz.
Input and Output
Input +4dB (max. +24dB), 10k Ω, Electronically balanced.
Output +4dB (max. +24dB), 600 Ω, Electronically balanced, XLR-3-32 type connector.
Signal Matrix Configuration 8 input, 8 input bus, 8 output bus, 8 output.
Mixing Configuration Programmable Inputs to Input Bus; 8 x 8 switch matrix, expandable to 32 x 8 with maximum of 4 DX-0808 linked / Output Bus to Output; 8 x 8 switch matrix, expandable to 8 x 32 with maximum of 4 DX-0808 linked / Total Signal Cross Points; 128.
Level Control 0dB to -60dB/-, 1dB steps.
Mute Individual input and output mute, all mute.
Others Input / Output routing displays, Fade in / Fade Out selection.
Other Functions
Preset Memories 16 presets.
Security Hardware; 3 status switch settings (Off; All functions available / 1; Lock all but memory section / 2; Lock all functions / Software; Password protected, System lock, Edit lock.
Control
Communication Ports Connectors RS-232C, RS-485 (switchable), XLR-3-31 type, RS-485 input, XLR-3-32 type, RS-485 output, Two DB9 female, RS-232C (front and rear panel).
Programming Software System Requirement Hardware; PC compatible, 80386 processor or higer, Math co-processor recommended for the frequency and phase response graphic display. 4MB of memory or higer, 1MB HDD space, VGA colour monitor recommended, Mouse recommended / Software; Windows 95 or Windows NT.
Memory Input / Output Connector; 8 pin, Mini DIN / Function; Memory control input and memory status output.
Panel Functions (Front Panel)
Memory Selection Up / down keys.
ID Number Setting Momentary slide switch and up/down keys. Displays 2-digit, 7 segment LED display, red, memory number and unit number, switchable, up / down key selection.
Operating Status LEDs MASTER (green).
Matrix Assignement Display Input Bus; 64 dot LED (green) / Output Dividing Bus; 64 dot LED (red).
Mute Switches Each output w/LED (green).
Power Switch Power On / Off.
Panel Functions (Rear Panel)
Input Mixing Bus Connector 2-8 pin DIN connector.
Output Dividing Bus Connector 2-8 pin DIN connector.
Ground Lift Switch Normal / Lift.
Power Inlet 3 pin IEC-320, standard.
Power
Power Requirement AC100V to AC240V, 50 / 60Hz.
Power Consumption 40W maximum.
Physical
Dimensions (W x H x D) 483 x 88.4 x 328mm, EIA 2-rack unit size.
Colour Black, anodised aluminium (front panel), Black, painted steel (chassis)
Weight 6kg

 

TOA DX-0808 Manual