RED-Z6524

$19.95 MSRP inc.GST

Redback – DISPL MODULE OLED 2828 AR DUINO

This OLED display works without a backlight. Thus, it can display deep black levels and can be thinner and lighter than a standard LCD. In low ambient light conditions such as a dark room an OLED screen can achieve a higher contrast ratio than an LCD. OLED technology is used in commercial applications such as displays for mobile phones and portable digital media players, car radios and digital cameras among others. 

Supports arduino controller and other 3.3V microcontroller. 

2828 OLED screen Wikidocs Page

 

SPECIFICATIONS

  • Operating Voltage:3.3V,5V
  • 262,144k Colors(max)
  • 128×128 RGB pixel resolution
  • Interface:SPI or Gadgeteer
  • Operating emperature:-30℃ ~ +70℃
  • OLED Size:26.855 x 26.864mm (1.057 x 1.058″)
  • Module Size:52.00 x 42.00mm (2.05 x 1.65″)
  • Weight:20 g
  • Size:1.5 inch
  • Driver IC:SSD1351
  • Pins Identification
  • Arduino port
  • 3.3:Logic power3.3V
  • 5V:OLED power 5V (through boost circuit to supply 13V to screen)
  • G:GND
  • RST:reset
  • SCK:SCK
  • SI:MOSI
  • CS:Chip Select
  • DC:D/C

*Specifications are subject to change without notice.