My Account

(07) 3397 8155

Facebook-f Instagram
Twitter
Amplifiers

LAB-CPA2402

Lab Gruppen – CPA2402 – Amplifier 2 x 240 Watt – 4/8 Ohm – 70/100 Volt – Bluetooth – USB – Brackets

$999.00 RRP Inc GST

Quantity

Lab.Gruppen – CPA2402

2 x 240 Watt Commercial Mixer Amplifier with 8 Inputs, Bluetooth Streaming, USB Media Player

2 x 240 Watt Commercial Mixer Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. CPA2402 is easy to install and operate – even for non-technical personnel. Simply put, the CPA2402 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.

Easy to Hook Up

The days of tape decks and CD players are long gone. Now your music lives on your smartphone or computer tablet, so you can stop searching for those outdated cables and fancy adapters. Now with a simple wave of your hand, you can stream music from any Bluetooth-equipped device such as your smart phone, tablet, laptop, etc. The CPA2402 also provides a USB media player with an intuitive LCD navigation to play audio files via USB stick. For connecting a balanced source such as a mixer or audio processor, a standard 3-pin Euroblock Input socket is provided. Alternatively, RCA cables can be connected for unbalanced stereo sources (summed to mono), such as players, phones or computers, however only one input source should be used at a time. Loudspeaker Output is provided in the form of a standard 2-pin Euroblock socket.

Easy to Install

The CPA2402 comes equipped with rubber feet, enabling the amps to be placed on a desk, shelf or any clear surface without any additional installation requirements. Furthermore, optional rack mounting hardware is also supplied, allowing one or several models to be housed and protected inside an enclosure. This adds extensive flexibility as a single product can be housed in a half 19″ rack or full rack enclosure as well as a pair of amplifiers can easily be mounted side-by-side in a single rack space. With the included brackets the unit can also be mounted to a wall or under a table/shelf.

_______________________________________________________

QUICK START GUIDE

Lab Gruppen – CPA Series – Quick Start

_______________________________________________________

Maximum Output Power
4 or 8 Ω per channel 240 W
Number of Amplifier Channels
Number 2
Minimun Load Impedance
4 Ω mode 4 Ω
8 Ω mode 8 Ω
70 V output mode 20 Ω
100 V output mode 42 Ω
Audio Outputs
Amplifier output 4-pin Euroblock connector
Aux output 2 x 3-pin Euroblock connector
Aux output max level 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input 2 x 5-pin Euroblock connector (channel A, E)
Mic/Line with summed RCA 4 x 3-pin Euroblock connector, 6 x stereo RCA
Impedance Balanced mic/line: 20 kΩ

Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or max aux output level Mic: 0.038 V (-26 dBu)

Balanced: 1.23 V (+4 dBu)

RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level 4.88 V (+16 dBu)
Microphone phantom voltage 48 V
Controls
Front Power standby button, input and output gain control, tone controls – bass and treble, bluetooth audio controls
Rear Load config – (4 Ω/8 Ω/70 V/100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom voltage, input routing (2-channel models only)
Tone Controls
Bass ±10 dB @ 100 Hz
Treble ±10 dB @ 10 kHz
Indicators
Power On (blue), force standby (red), standby (yellow)
Inputs Signal (green LED): >12.3 mV (-36 dBu)

Fault (red LED): Clip
Master Signal (green LED): >-50 dBu

Fault (red LED): Overheat, DC fault, over current, etc
Bluetooth
Frequency range 2402 – 2480 MHz
Channel number 79
Bluetooth version 4.2
Reception range Up to 15 m (45 ft)
Output power 10 dBm
Supported codec SBC
Supported profiles AVRCP 1.4, A2DP 1.2
USB Drive Requirements
Type USB 2.0
Min capacity 1.0 GB
Min speed 12 MB/s read, 7 MB/s write
Supported file formats AAC, WMA, MP3, WAV
System
Output circuit type Class D
Remote connector 2 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power <0.5%
Frequency response 20 Hz to 20 kHz, +0.5/-2 dB
Crosstalk (2 channel models) >70 dB
Signal-to-noise >95 dB
High-pass filter 80 Hz HPF
Circuit Protection
Cooling Convection-cooled, fanless
Amplifier protection Thermal protection, over current protection, DC protection
Load protection Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage 100-240 V~, 50/60 Hz with active power factor correction
Fuse T 10 A H 250 V
Power consumption 1/8th rated power @ 4 Ω 140 W
Mains connector Standard IEC connector
SKU LAB-CPA2402 Categories , , , ,

Related Products

Related products

Contact Us

Have any questions? We’d love to hear from you.




    (07) 3397 8155

    sales@delsound.com.au

    Monday – Friday
    8:00am – 4:00pm

    58 Holdsworth Street,
    Coorparoo, Qld 4151

    View Cart Checkout Continue Shopping