VTX A8 AF EB

Extension Bar

Description 

The VTX A8 AF EB extension bar was designed to operate in conjunction with the VTX A8 AF array frame to facilitate either single-point, two-point front-to-back or side-by-side suspension methods. The extension bar is compatible with 5/8-inch shackles and can be stored above the array frame during transportation. The extension bar can extend to the front or the rear of the frame to accommodate both up-tilt and down-tilt aiming options. Three connection points are available for attaching the extension bar to the array frame, allowing for precise control of shackle positioning for single-point applications.

One VTX A8 AF EB extension bar is included with the purchase of an array frame and additional extension bars can be purchased to facilitate side-by-side suspension. Configurations and load conditions for using the VTX A8 AF EB can be obtained using the LAC-III software application.

Highlights:

• Extension Bar for use with VTX A8 AF
• 0.5-degree pick-point resolution
• Lightweight design
• Compatible shackle size: 5/8 in

Included:

• (1) VTX A8 AF EB Extension Bar
• (3) 5/8 in Shackles
• (4) VTX Extension Bar Attachment Brackets
• (1) Set of Screws for Bracket Installation

TECHNICAL SPECIFICATIONS

Construction: High-grade steel with anti-corrosion coating
Finish: Black powder coat
Compatible Shackle Size: 5/8 inch
Mechanical Limits1
Maximum:
Safe Limit:
(24) VTX A8 | (13) VTX B18
(22) VTX A8 | (10) VTX B18
Dimensions (H x W x D)2
: 138 mm x 734 mm x 26 mm
(5.4 in x 28.9 in x 1.0 in)
Net Weight3
: 7.5 kg (16.5 lbs)