Biamp Vocia VA-8600c Networked Multi-channel Amplifier

Description 

The VA-8600c is CobraNet® enabled and features eight channels of modular amplification and DSP with optional channel to-channel or device-to-device failover. It can support up to eight amplifier cards that are individually software configurable from 100600 Watts for up to 2400 Watts of power per chassis. 70V, 100V and low-impedance outputs are software selectable per card.

The on-board DSP provides comprehensive fixed-chain digital-signal processing within the device, including volume control, ducking, equalization, compressor/limiter, speaker crossover, delay, and output gain. Emergency messages for life-safety compliant systems are stored in non-volatile memory within the VA-8600c. Intuitive software provides audio system design via PC. Two RJ45 connectors on the rear panel of the VA-8600c provide redundant connectivity to control data and audio over a single Ethernet cable. As part of the Vocia system, the VA-8600c meets EN 54-16 certification for facilities of all sizes. he modular amplifier shall be designed exclusively for use with Biamp® Vocia systems.

The amplifier shall be modular and support software configurable power levels/load options of 8 amplification modules per frame with 100 to 600 Watts per module (maximum of 2400W per chassis) and 70V or 100V with direct drive capability, or low-impedance (4 or 8?) operation. The amplifier shall provide control data and digital audio over CobraNet®.

The amplifier shall provide dual Ethernet ports for redundant network connection. The amplifier shall provide front panel LED identification of amplifier and card failure, signal present, clip present, fan stuck rotor fault, heat sink temperature fault and provide additional software monitoring features including short circuit on output fault. The amplifier shall be rack mountable (3RU) and feature software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity. The amplifier shall support channel-to-channel and chassis-to-chassis failover. The amplifier shall be EN54-16 certified, CE marked, UL listed and shall be compliant with the RoHS directive. Warranty shall be five years. The amplifier shall be a Vocia VA-8600c.

Features

Specifications