Biamp

BIA VA-4030E

Vocia – VA-4030e

$9,869.20 RRP Inc GST

Quantity

Biamp Vocia VA-4030e Networked Four-channel Amplifier

 

Description 

 

The VA-4030e is a digital networked, four-channel amplifier for use in Vocia® systems. It is capable of delivering continuous audio power at 30 Watts RMS per channel. The VA-4030e is CobraNet® enabled for audio and control with dynamic use of bundles. It has local analog inputs and dual power supply. Two RJ45 connectors on the rear panel provide redundant CobraNet connectivity to the Vocia network.

The on-board DSP provides comprehensive fixed-chain, digital signal processing within the device. In addition, emergency messages can be stored in local non-volatile memory. Page active relay outputs provide a contact closure per channel when paging is active on the channel. The amplifier offers low impedance and constant voltage outputs. The VA-4030e also has comprehensive failover capability with device-to-device and channel-to-channel failover. EN 54-16 certification pending.

 

Features

 

  • Four channels of 30W RMS per channel
  • Transformer coupled outputs, low impedance (4 or 8 ohms) or 25V, 70V or 100V (hardware selectable)
  • Comprehensive failover
  • -Device-to-device
  • -All-to-1 channel
  • -1:1 channel
  • Supports Page Active Relay (PAR), ELD-1 and ANC-1
  • Local non-volatile storage of emergency messages
  • LED status and signal indication
  • Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization and output sensitivity
  • CobraNet audio/control with dynamic use of available bundles
  • Local background source support with single mic/line analog audi-input for each channel (gain adjustable, switchable phantom power)
  • Dual power supply
  • -AC Mains
  • -Single or Dual 24V DC inputs
  • Dual Ethernet ports for redundancy
  • Rotary switches for device identification
  • Rack mountable (2RU)
  • EN 54-16 certified, CE marked, UL listed and RoHS compliant
  • Covered by Biamp Systems’ warranty

 

Specifications 

 

  •  Memory: 5.625 MB
  •  Inputs: 20 bits, 48 kHz, 5-1/3 ms (fixed)
  •  Frequency Response: 40Hz-20kHz +/- 2dB
  •  Signal to noise ratio: >88dB, unweighted
  •  THD + Noise:
    <0.5% 50Hz-100Hz
    <0.3% 100Hz-10kHz
  •  Connections:
    Network: RJ45 with shielded Ethernet (Cat5, Cat5e, Cat6 or Cat7)
    Terminal block connectors (analog inputs)
  •  Total Output Power: 4 x 30W RMS, 120W maximum
  •  Environment:
  •  Ambient Operating Temperature Range: 26-107 degrees F (-3°C to 42°C)
  •  Ambient intake humidity: 0-100% (non-condensing)
  •  Altitude: 0-10,000 Feet MSL (0-3,000m)
  •  Power:
    100-240VAC; 50/60Hz
    Single or Dual 24V DC source (not supplied)
  •  Overall Dimensions:
  •  Height: 3.25 inches (82.5 mm)
  •  Width: 19.0 inches (483 mm)
  •  Depth: 14.2 inches (361 mm)
  •  Weight: 26.2 lbs (11.9 kg)
  •  Compliance:
    EN 54-16 certified
    FCC Part 15B
    CE marked
    UL 60065 and C-UL listed
    CCC pending
    C-Tick
    RoHS Directive
    EN 60849, AS 60849 verified
  •  Depth: 14.20 in
  •  Height: 3.25 in
  •  Width: 19 in
  •  Product Weight: 26.20 lbs
  •  Maximum Frequency Response (Bandwidth): 20 kHz
  •  Maximum Frequency Response (Bandwidth): 20000 Hz
  •  Minimum Frequency Response (Bandwidth): 40 Hz
  •  Minimum Frequency Response (Bandwidth): 0.04 kHz
SKU BIA-VA-4030E Categories , , , ,

Related Products