| Behringer Q1202USB Specs |
| Basic Specifications |
| Total # Of Inputs |
12 |
| Channels |
4 mono
4 stereo |
| USB Audio |
Type B connector
2 channels in / 2 channels out
48 kHz sample rate |
| Busses |
Stereo mix buss, mono FX buss |
| Microphone Inputs |
| Type |
XLR connector, balanced, discrete input circuit |
| Mic Preamps |
4 x XENYX preamp |
| Equivalent Input Noise |
-134 dB / -136 dB A-weighted @ 0Ω source resistance
-131 dB / -133 dB A-weighted @ 50Ω source resistance
-129 dB / -131 dB A-weighted @ 150Ω source resistance |
| Frequency Response |
< 10 Hz to 150 kHz (-1 dB)
< 10 Hz to 200 kHz (-3 dB) |
| Gain Range |
+10 to +60 dB |
| Maximum Input Level |
+12 dBu @ +10 dB Gain |
| Impedance |
1.9kΩ |
| Signal-to-Noise Ratio |
110 dB A-weighted (0 dBu In @ +22 dB gain) |
| THD + N |
0.005% / 0.004% A-weighted |
| Phantom Power Supply |
+48V |
| Line Inputs |
| Type |
1/4″ TRS connector, balanced |
| Impedance |
20kΩ, 10kΩ unbalanced |
| Gain Range |
-10 to +40 dB |
| Maximum Input Level |
+22 dBu @ 0 dB gain |
| Stereo Inputs |
| Type |
Dual 1/4″ TRS connectors, balanced |
| Impedance |
20kΩ, 10kΩ unbalanced |
| Gain Range |
-20 to +20 dB |
| Maximum Input Level |
+22 dBu |
| Tape/Media |
| Type |
Dual RCA connectors |
| Input Impedance |
18kΩ |
| Maximum Input Level |
+22 dBu |
| Output Impedance |
1kΩ |
| Maximum Output Level |
+22 dBu |
| Equalizer |
| EQ Controls |
3-band EQ on mono channels:
Low: ±15 dB @ 80 Hz
Mid: ±15 dB @ 2.5 kHz
High: ±15 dB @ 12 kHz |
| AUX Section |
| Aux Sends |
1/4″ TRS connector, balanced
Impedance: 120Ω
Maximum output level: +22 dBu |
| Main Outputs |
| Type |
1/4″ TRS connector, balanced |
| Impedance |
120Ω balanced |
| Maximum Output Level |
+22 dBu |
| Control Room Outputs |
| Type |
1/4″ TRS connector, balanced |
| Impedance |
approx. 120Ω |
| Maximum Output Level |
+22 dBu |
| Headphone Output |
| Type |
1/4″ TRS stereo connector, unbalanced |
| Maximum Output Level |
+21 dBu / 150Ω (+25 dBm) |
| Performance |
| Compressor |
Independent compressor on each mono channel |
| Metering |
4-LED per side |
| Faders |
1 x 60 mm master fader |
| Noise |
Main mix @ -∞, channel fader @ -∞
-106 dB / -109 dB A-weighted
Main mix @ 0 dB, channel fader @ -∞
-93 dB / -96 dB A-weighted
Main mix @ 0 dB, channel fader @ 0 dB
-84 dB / -87 dB A-weighted |
| General |
| Power Consumption |
20W |
| Dimensions (W x D x H) |
9.8 x 9.8 x 2.0″ (250 x 248 x 50 mm) |
| Weight |
3.3 lb (1.5 kg) |
