AUS-ATC24450

$1,449.00 MSRP inc.GST

Australian Monitor – ATC24450 Multicore with stage box. 50m – 24 sends – 4 returns

Compact 1 RU Class D amplifier with an impressive 12 inputs the Australian Monitor AMD200 will give installers untold flexibility in a 1 RU mixer amplifier. Featuring 8 balanced Mic/Line level inputs each with 34V DC phantom power available and 4 dual RCA program source inputs and delivering 200W at 100V, 70V, 8 and 4 ohms. With on board tones (Bell, Pre-Announce, Alert and Evac), remote master VCA, Vox triggered output (assignable to any one or combination of mic/line ins), 24DVC back up power input and low power contact closure, the Australian Monitor AMD200 has all the features of the smaller AMD100 compact class D amplifier. The AMD200 also boasts the power of on board DSP processing, the connectivity of third party control via the RS485 port, which supports the Australian Monitor ICON CP control panel or allows connection to a third party control system and a USB port for setup or for PC control.

  • 8 mic/line inputs + 4 Stereo source inputs
  • Stereo line output + Mono amplifier output (Constant voltage or Low impedance operation)
  • 1 RU Class D design
  • 20Hz – 20kHz frequency response (Line Level Output)
  • Low power contact closure
  • DSP processing on board with Parametric EQ, compressor, noise gate and high and low pass ?lters
  • Third party control via serial, Software GUI or via Icon-CP control panel
  • Remote VCA master volume control
  • Mic/Line inputs have 34 volt phantom power

Specification

  • Depth : 330 mm
  • Height : 430 mm
  • Power Output : 200 W
  • Width : 44 mm
  • Shipping Weight : 9 kg
  • Phantom Power : 34 V DC
  • Shipping Dimensions : 140 x 540 x 410mm (5.51 x 21.3 x 16.1in)
  • Product Weight : 7 kg
  • Crosstalk Between Channels : > 80 dB
  • Operating Temperature (Maximum) : 45 C
  • Operating Temperature (Minimum) : 10 C
  • Frequency response Mic/Line Inputs – Line Level Output : 20 to 20kHz, -3dB
  • Total Harmonic Distortion Mic/Line Inputs – Line Level Output <0.05% : 0dB gain
  • Total Harmonic Distortion Mic/Line Inputs – Line Level Output : < 0.1% at 45dB gain
  • Signal to Noise Ratio – Mic/Line Input : > 92 dB
  • Signal to Noise Ratio – Stereo Input : > 91 dB
  • Thermal Dissipation – Idle : 15 W
  • Power Input AC Mains : (230 to 240/115 to 120V) or +24V DC
  • Recommended Operating Humidity : 5 to 95 %
  • Frequency response Mic/Line Inputs – Amplifier Output : 60 to 20kHz, -3dB
  •  Amplifier Type – Mixer Amplifier

AUS ATC24450 Data Sheet