2-Way Radios & Receivers

ICO-RP-SAT1

Icom – RP-SAT1

$9,000.00 RRP Inc GST

Quantity

IRIDIUM® REPEATER

RP-SAT1

In-Building Repeater for Iridium® Satellite Communications

Descriptions

・Relays Iridium® and GNSS signals, and provides a solution for satellite communications indoors and mobile applications

・Indoor coverage: Maximum 5 m

・RF gain level can be adjusted on the front panel (40 to 50 dB)

・Compact design offers flexible installation: 265 × 55 × 170 (W × H × D, mm), 10.4 × 2.2 × 6.7 (W × H × D, inch)

・Not only satellite PTT (IC-SAT100), but also Iridium® satellite phones and SBD (Short Burst Data) service can be used

・Use supplied coaxial cables (5 m, 16.4 ft for indoor and 10 m, 32.8 ft for outdoor) or user supplied coaxial cables*1

*1 Outdoor cable: 5 dB or less attenuation. Indoor cable: 3 dB or less attenuation.

Specifications

General

Frequency range 1616.02–1626.48 MHz (Uplink/Downlink)
1575.42–1605.40 MHz (Downlink, GNSS L1 Band)
Antenna impedance 50 Ω (N-J connector)
Operating temperature range –30°C to +60°C, –22°F to +140°F
Power supply requirement 13.2/26.4 V DC nominal
(10–32 V DC Operating Voltage)
Current drain (approximate) Less than 8.0 A (at relay)
Less than 2.5 A (stand-by)
Dimensions (W×H×D)
(Projections not included)
265 × 55 × 170 mm,
10.4 × 2.2 × 6.7 in
Weight (approximate) 2.6 kg, 5.7 lb

Uplink

Total gain 40–50 dB (1 dB step adjustable)
Gain 40 dB at 0 dBm Input
Gain 50 dB at –10 dBm Input
Rated output power +40 dBm
EVM Less than 7%
Spurious emissions Less than –13.0 dBm

Downlink

Total gain 40–50 dB (1 dB step adjustable)
at -80 dBm Input
Noise figure Less than 3.0 dBm
Spurious emissions Less than –13.0 dBm

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • OPC-2430, 5 m, 16.4 ft coaxial cables for indoor, 2 pieces
  • OPC-2431, 10 m, 32.8 ft coaxial cables for outdoor, 2 pieces
  • AH-38, satellite antennas, 4 pieces
  • OPC-2426, DC power cable, 1 piece

 

SKU ICO-RP-SAT1 Categories , , ,

Related Products